EMT Conduit Connector, Offset, 1/2 in, Die Cast Zinc, 2.09 in Length, 0.94 in Dia

Features:

• Size: 0.5 inches
• Application Type: EMT (Electrical Metallic Tubing)
• Material: Zinc die-cast
• Weight: 0.04 lbs
• Construction: Concrete-tight
• Standards: Meets UL514B 
• This connector is used to connect EMT conduit to a metal outlet box, load center, or other metal boxes where an offset is needed.
• It's suitable for indoor use.

Applications:

1. Connecting to Metal Outlet Boxes: Used to connect EMT conduit to metal outlet boxes where an offset is required.
2. Load Centers: Ideal for connecting EMT conduit to load centers in electrical installations.
3. Other Metal Boxes: Suitable for connecting EMT conduit to various other metal boxes where an offset is needed

Installation:

1. Measure and Cut the Conduit: Use a tape measure to determine the length of EMT conduit needed. Mark the cutting point with a marker and cut the conduit using an EMT conduit cutter.
2. Deburr the Edges: Smooth out the edges of the cut conduit using a deburring tool to remove any sharp or rough edges.
3. Prepare the Connector: Ensure the connector is clean and ready for installation.
4. Insert the Conduit: Slide the cut end of the conduit into the connector until it is fully seated.
5. Tighten the Setscrews: Use a screwdriver to tighten the setscrews on the connector. This secures the conduit in place and ensures a concrete-tight connection.
6. Check Alignment: Use a level to ensure the conduit is straight and properly aligned.
7. Connect to the Box: Attach the connector to the metal outlet box, load center, or other metal box where the offset is needed.

Tools Required:

1. EMT Conduit Cutter: To cut the EMT conduit to the desired length.
2. Deburring Tool: To smooth out the edges of the cut conduit.
3. Tape Measure: To measure the length of the conduit accurately.
4. Marker: To mark the cutting points on the conduit.
5. Screwdriver: To tighten the setscrews on the connector.
6. Level: To ensure the conduit is installed straight and level