Liquidtight Straight Connector, Uninsulated, 1/2 in, Steel/Malleable Iron, Electro Plated Zinc, Silver, 1.738 in Length, 1.173 in Width, 1.349 in Height

Features:

• Usage: It is designed for use with flexible metallic liquidtight conduit and Type B flexible nonmetallic liquidtight conduit. It can be used in both indoor and outdoor locations.
• Construction: Made from zinc-electroplated steel for added corrosion protection.
• Features:
• Split Gland-Ring: Ensures a secure seal and prevents pullouts.
• Sealing Washer and Locknut: Included to create a liquidtight seal when terminating the connector in a threadless opening.
• Applications: Suitable for hazardous locations, including Class I, Div 2; Class II, Div 1 & 2; and Class III, Div 1 & 2 

Applications:

1. Industrial Environments: Ideal for connecting liquidtight conduit to electrical enclosures, motor leads, and control panels in factories and manufacturing plants.
2. Outdoor Installations: Suitable for outdoor lighting, HVAC systems, and other equipment exposed to the elements, thanks to its corrosion-resistant construction.
3. Hazardous Locations: Approved for use in hazardous locations such as:
   • Class I, Div 2: Areas where flammable gases or vapors may be present.
   • Class II, Div 1 & 2: Areas with combustible dust.
   • Class III, Div 1 & 2: Areas with easily ignitable fibers or flyings.
4. Commercial Buildings: Used in commercial settings for wiring systems that require protection from moisture and physical damage.
5. Residential Projects: Can be used in residential applications where liquidtight conduit is needed, such as in garages or outdoor electrical systems.

Conduit Compatibility: Ensure you are using either flexible metallic liquidtight conduit or Type B flexible nonmetallic liquidtight conduit 

Tools Needed:

• • Adjustable wrench
  • Screwdriver
  • Utility knife
  • Tape measure
  • Pliers

Installation Steps:

• • Preparation: Cut the conduit to the desired length using a utility knife and measure accurately with a tape measure.
  • Assembly: Insert the conduit into the connector and tighten the split gland-ring to ensure a secure fit and prevent pullouts.
  • Connection: Attach the connector to the electrical box or enclosure. Use the sealing washer to create a liquidtight seal and secure the connector with the locknut
     

Compliance:

• Verify that the installation meets local electrical codes and standards.
• Suitable for use in hazardous locations, including Class I, Div 2; Class II, Div 1 & 2; and Class III, Div 1 & 2