Liquidtight Straight Connector, Uninsulated, 1/2 in, 90 deg, Steel/Malleable Iron, Electro Plated Zinc, 1.17 in Length, 2.358 in Width, 2.084 in Height

Features:

• Trade Size: 1/2 inch 
• Angle: 90 degrees 
• Material: Zinc-electroplated steel for corrosion resistance  
• Dimensions:
  • Length: 1-5/8 inches 
  • Width: 1-5/16 inches 
• Thread Type: 1/2 inch NPT 
• Compatibility: Suitable for use with flexible metallic liquidtight conduit and Type B flexible nonmetallic liquidtight conduit  
• Certifications: UL Listed, CSA Listed 
• Applications: Suitable for indoor and outdoor use, including hazardous locations such as Class I, Div 2; Class II, Div 1 & 2; and Class III, Div 1 & 2

Installation:

1. Conduit Compatibility:

   • Ensure you are using either flexible metallic liquidtight conduit or Type B flexible nonmetallic liquidtight conduit 

2. Tools Needed:

   • Adjustable wrench
   • Screwdriver
   • Utility knife
   • Tape measure
   • Pliers

3. Installation Steps:

   • Preparation: Cut the conduit to the desired length using a utility knife and measure accurately with a tape measure.
   • Assembly: Insert the conduit into the connector and tighten the split gland-ring to ensure a secure fit and prevent pullouts.
   • Connection: Attach the connector to the electrical box or enclosure. Use the sealing washer to create a liquidtight seal and secure the connector with the locknut 

4. Compliance:

   • Verify that the installation meets local electrical codes and standards.
   • Suitable for use in hazardous locations, including Class I, Div 2; Class II, Div 1 & 2; and Class III, Div 1 & 2