Set Screw Connector, 3/4 in, Die Cast Zinc

Features:

• Material: Die-cast zinc
• Size: 3/4 inch
• Type: Offset connector
• Usage: Connects EMT conduit to metal outlet boxes or enclosures
• Compliance: UL Standard 514B, NEMA FB-1
• Concrete Tight: When taped 

Applications:

1. Connecting EMT Conduit to Metal Outlet Boxes: It is primarily used to connect EMT conduit to metal outlet boxes or enclosures, ensuring a secure and reliable connection 
2. Commercial and Residential Wiring: Commonly used in both commercial and residential electrical installations to maintain the integrity of the conduit system 
3. Concrete Tight Applications: When taped, it provides concrete-tight protection, making it suitable for installations where a secure and moisture-resistant connection is required 
4. Indoor Electrical Systems: Specifically designed for indoor use, ensuring a reliable connection between EMT conduit and electrical boxes 

Instructions:

1. Preparation:

   • Ensure the ends of the EMT conduit are clean and free from burrs.
   • Measure and cut the conduit to the desired length.

2. Assembly:

   • Insert the EMT conduit into the offset connector until it reaches the stop.
   • Tighten the set screw on the connector to secure the conduit.

3. Connection to Box:

   • Insert the threaded end of the connector into the knockout hole of the electrical box.
   • Secure the connector to the box using the provided locknut. Tighten the locknut with a wrench to ensure a firm connection.

4. Inspection:

   • Check the connection to ensure it is tight and secure.
   • Verify that the connector is properly aligned with the conduit and the box 

Tools Required:

1. Pipe Cutter or Hacksaw: To cut the EMT conduit to the desired length.
2. Deburring Tool: To remove any burrs from the cut ends of the conduit.
3. Screwdriver: To tighten the set screws on the connector.
4. Wrench: To tighten the locknut when securing the connector to the electrical box.
5. Tape Measure: To measure the conduit lengths accurately.
6. Level: To ensure the conduit is installed straight and level