EMT Conduit Connector, Set Screw, 1 in, Threaded x Set Screw, For Use With: Use to join EMT to box or enclosure, Steel, Plated Zinc, 2.25 in Length, 1.938 in Width

Features:

• Material: Zinc-plated steel
• Size: 1 inch
• Type: Set screw connector
• Usage: Joins EMT conduit to a box or enclosure
• Compliance: UL Standard 514B, NEMA FB-1
• Concrete Tight: When taped
• Thread Length: 0.563 inches
• Diameter: 1.938 inches
• Includes: Steel zinc-plated rigid locknut

Applications: 

1. Dry Locations: Ideal for use in dry environments to bond EMT thin wall conduits to electrical boxes or enclosures 
2. Commercial and Residential Wiring: Commonly used in both commercial and residential electrical installations to ensure secure connections.
3. Concrete Tight Applications: When taped, it provides concrete-tight protection, making it suitable for installations where a secure and moisture-resistant connection is required
    
4. Indoor Electrical Systems: Specifically designed for indoor use, ensuring a reliable connection between EMT conduit and electrical boxes 

Installation: 

1. Preparation:

   • Ensure the ends of the EMT conduit are clean and free from burrs.
   • Measure and cut the conduit to the desired length.

2. Assembly:

   • Insert the EMT conduit into the connector until it reaches the stop.
   • Tighten the set screw on the connector to secure the conduit.

3. Connection to Box:

   • Insert the threaded end of the connector into the knockout hole of the electrical box.
   • Secure the connector to the box using the provided locknut. Tighten the locknut with a wrench to ensure a firm connection.

4. Inspection:

   • Check the connection to ensure it is tight and secure.
   • Verify that the connector is properly aligned with the conduit and the box 

Tools Required: 

1. Pipe Cutter or Hacksaw: To cut the EMT conduit to the desired length.
2. Deburring Tool: To remove any burrs from the cut ends of the conduit.
3. Screwdriver: To tighten the set screws on the connector.
4. Wrench: To tighten the locknut when securing the connector to the electrical box.
5. Tape Measure: To measure the conduit lengths accurately.
6. Level: To ensure the conduit is installed straight and level.